The Difference of the Pulmonary-Artery Pressure of the Migrants from Difference Elevation at the 4636 - 4907 m Altitude

Study Objective： To compare and analyze the changes of the pulmonary-artery pressure of the migrants coming from different elevation in the hypoxic environment of 4636 - 4907 m extreme altitude. To explore the susceptibility to hypoxic pulmonary-artery hypertension （PH） in the subjects from different altitude and profession. Methods： By using Color Doppler Ultmsonography （CDU）, measuring the pulmonary-artery pressure of 207 healthy men, who had continuously being lived and worked at the extreme altitude for more than six months, and then were divided into three groups according to their profession and the altitude of original living place. Results： There was a significant difference in the outcomes of pulmonary-artery pressure from the 3 groups. Conclusions： Altitude of original living place, labor intensity are some of factors that impact the pulmonary-artery pressure of the people who exposure to a hypoxic environment. The pulmonary- artery pressure of person without strenuously physical work experience was more sensitive to hypoxic surroundings than that of labor workers. It was not always the fact at an extreme altitude that the moderate altitude mountaineers were superior to other migrants from a lower altitude or plain. The higher PH was found in the groups of the moderate altitude mountaineers and labor workers. It is unlikely certain that one with PH would surfer from HAPE.     

不同支承点设置对简支梁及连续梁影响的探讨

通过对简支梁及连续梁在不同支承点设置方案的分析比较,阐述了支承点设置对梁内力及变形的影响,同时对在实际工程中如何合理地设置梁的支承点提出建议,供设计人员参考.     

121例儿童钩突变异螺旋CT表现与鼻旁窦炎症的相关性

目的:探讨儿童鼻旁窦炎症与钩突解剖变异的相关关系.方法:对121例2～13岁儿童进行高分辨率螺旋CT容积扫描及多平面重建,测量钩突偏曲角度并与鼻窦炎症进行二项式logistic相关回归分析.结果:儿童鼻窦钩突形状、附着形式及角度变异较大,且随窦腔浑浊度不同导致测量角度有较大变化,并与鼻窦炎症无显著统计学关联.结论:儿童钩突形状及测量偏曲角度存在变异较大的特点,除钩突角度特别接近水平外,与鼻窦炎症不存在明显相关性.     

Finding finer functions for partially characterized proteins by protein-protein interaction networks

Based on high-throughput data, numerous algorithms have been designed to find functions of novel proteins. However, the effectiveness of such algorithms is currently limited by some fundamental factors, including (1) the low a-priori probability of novel proteins participating in a detailed function; (2) the huge false data present in high-throughput datasets; (3) the incomplete data coverage of functional classes; (4) the abundant but heterogeneous negative samples for training the algorithms; and (5) the lack of detailed functional knowledge for training algorithms. Here, for partially characterized proteins, we suggest an approach to finding their finer functions based on protein interaction sub-networks or gene expression patterns, defined in function-specific subspaces. The proposed approach can lessen the above-mentioned problems by properly defining the prediction range and functionally filtering the noisy data, and thus can efficiently find proteins’ novel functions. For thousands of yeast and human proteins partially characterized, it is able to reliably find their finer functions (e.g., the translational functions) with more than 90% precision. The predicted finer functions are highly valuable both for guiding the follow-up wet-lab validation and for providing the necessary data for training algorithms to learn other proteins.     

GATS框架下我国劳务输出体制的完善

自然人移动作为GATS下第四种模式自身的特点,以及相关国际规则规定的不明确,使得自然人移动在国际贸易中壁垒重重.通过分析GATS下自然人移动的承诺情况,借鉴国外成功实践并吸收了国内外学者的最新研究成果,最后立足我国国情,建议我国应建立统一的劳务输出管理机构,制定专门的劳务输出法,改革签证制度,统一国内有关资格认证、许可的标准,并积极参与国际服务贸易规则的制订,以完善我国对外劳务输出体制.     

硼对12Ni3CrMoV高强度钢焊接接头冷裂敏感性的影响

低碳调质高强度钢中添加硼对焊接冷裂敏感性的影响较少有人研究,并存在两种不同意见.本文对含硼量分别为0.005%,0.0014%,0.0028%,0.0035%的12Ni3CrMoV调质高强度钢焊接冷裂敏感性进行研究.试验结果表明:1.插销试验临界应力:含硼钢比无硼钢(含硼0.0005%)高;含硼钢中,临界应力按含硼量0.0014%,0.0028%,0.0035%的顺序递减.2.扫描电镜断口分析:无硼钢有沿晶断裂区、准介理断裂区和韧窝断裂区.含硼钢没有沿晶断裂区,只有准介理断裂区和韧窝断裂区.3.焊条未烘干时,无硼和含硼钢的插销临界应力都降低,无硼钢沿晶断裂区扩大,含硼钢仍无沿晶断裂区.4.硼在HAZ粗晶区中沿奥氏体晶界形成偏聚带,硼相主要沿奥氏体晶界呈不连续点状析出.含硼愈多,沿奥氏体晶界偏聚和硼相析出也愈多.5.C.D.Beachem提出的断口形貌发展过程示意图可以解释无硼钢断裂,不能完全解释含硼钢断裂过程.6.裂纹敏感性成分Pcm值表达式中,硼项系数为" 5"值得商榷.就本文钢材而言,硼项函数应为"负变数".本文对含硼钢延迟裂纹机理作了探讨.     

一种新的基于Kohonen网络的图像矢量量化

矢量量化是一种重要的数据压缩方法.本文利用Kohonen自组织映射神经网络进行矢量量化,首次较为详细地讨论了具体实现的步骤与细节,并在此基础上为改善边缘质量,提出一种基于Laplas算子检测边缘弓引导神经网络训练的方法,并通过实验证明其效果是明显的.     

复合氧化物晶体晶格能的近似计算

本文以 Born-Harb 循环为依据,推导了复合晶体晶格能和与其相应的各二元化合物晶体晶格能之间的关系,并由此给出了复合氧化物晶体晶格能近似计算的新公式。对20种复合氧化物晶体晶格能计算结果的分析表明:用本文所给公式对复合氧化物晶体晶格能进行近似计算是可行的。     

边界拟合坐标系中的流动方程

本文提出了流体力学解析边界拟合坐标系方法，及建立在这种坐标系基础上对流动方程进行摄动处理的方法，并列举几种流动建立了解析边界拟合坐标系中的方程。     

Cu基形状记忆合金中析出相的研究

本文利用 X 射线衍射分析、透射电镜等技术,研究了几种热处理制度下 Cu—27.84 Al—3.82 Ni(at%)合金中析出相;用会聚束(CBED)技术测定了析出相与马氏体的取向关系。结果表明:分级处理试样中析出相 r_2是复杂立方结构,晶格参数 a=0.87nm;大量弥散的折出相引起共格应变场,从而使分极处理试样 X 射线衍射峰型宽化;r_2与2H 马氏体的取向关系为;[00]2H‖[001]_r_2,(10)_(2H)‖(300)_r_2。